Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- grundlagen
- ll]]. Die Standardshell bei Linux Systeme ist die Bash, bei FreeBSD {{wiki:os:freebsd.png|}} die Csh. Di
- shell
- ckelt. Auf neueren Linux Systemen wird meist die "bash" Shell verwendet. \\ \\ In der Datei "/etc/shell... User die verfügbaren Shells mit Pfadangabe ("/bin/bash", "/bin/sh" u.s.w.). \\ \\ Zur Verkettung oder an... \ \\ **__Beispiel einer /etc/shells:__** \\ <code bash> user@home:~# cat /etc/shells # /etc/shells: ... sr/bin/tcsh /bin/tcsh /usr/bin/esh /bin/dash /bin/bash /bin/rbash </code> \\ \\ \\ \\ ===== Shells =====
- nutzungseinschraenkung
- ht. \\ \\ \\ **Beispiel /etc/fstab:** \\ \\ <code bash> # /etc/fstab: static file system information. # ... d die aktuelle Belegung ermittelt. \\ \\ \\ <code bash>[root@localhost ~]# quotacheck -avugm</code> \\ \... Quota Dateien werden aktualisiert. \\ \\ \\ <code bash>[root@localhost /]# ls -l insgesamt 142 -rw------... n quotacheck automatisch erstellt. \\ \\ \\ <code bash>[root@localhost /]# touch aquota.user</code> \\ F
- dateisystem
- Verzeichnisse für Benutzer abgelegt. \\ \\ <code bash> ulli@home:~$ cat ~/.config/user-dirs.dirs # This... count sofort.) \\ \\ \\ **Beispiel:** \\ \\ <code bash> root@home:~# usermod -l nadine -d /home/nadine -... Dateisperren. \\ \\ \\ **Beispiel:** \\ \\ <code bash>procinfo -fn2</code> \\ Prozess Informationen mit... vorher mit fdisk erstellt werden. \\ \\ \\ <code bash>mkswap /dev/hd?</code> \\ Swap Partition erstelle
- hardware_geraetedateien
- [h]da5.</note> \\ \\ **__Beispiel:__**\\ \\ <code bash> ulli@home:~$ ls -l /dev ... brw-rw---- 1 root d... ezeigt, sofern sie erkannt werden. \\ \\ \\ <code bash> root@home:~# blkid /dev/sda1: UUID="1e1edd4f-419... kgegeben. \\ \\ \\ \\ === Beispiele: === \\ <code bash> root@home:~# blkid -i /dev/sdc1 DEVNAME=/dev/sdc... ationen über E/A-Begrenzungen aus. \\ \\ \\ <code bash> root@home:~# blkid -i -p /dev/sdc1 DEVNAME=/dev/
- fail2ban
- .png}} Debian Systems mit dem Befehl. \\ \\ <code bash>root@home:~# apt install fail2ban</code> \\ \\ \\
- ampache_-_webbasiertes_musikstreaming
- /usr/local/bin/composer" verschieben. \\ \\ <code bash>root@home:~# mv composer.phar /usr/local/bin/comp... e Installationsverzeichnis ausführen. \\ \\ <code bash>root@home:/var/www/ampache# composer install --pr... "apt-cache" Befehl ermittelt werden. \\ \\ <code bash> root@home:~# apt-cache show ampache Package: amp... aus den Debian Quellen installieren. \\ \\ <code bash>root@home:~# apt install ampache</code> \\ \\ \\
- liquidsoap_-_streaming_tool
- :debian.png}} Systeme folgendend aus. \\ \\ <code bash>root@home:~# apt install liquidsoap</code> \\ \\ ... können zusätzlich installiert werden. \\ \\ <code bash> root@home:~# apt-cache search liquidsoap-plugin-... und folgende Verzeichnisse angelegt. \\ \\ <code bash> root@home:~# find / -name liquidsoap /usr/lib/li... ich im Verzeichnis "/etc/liquidsoap". \\ \\ <code bash> root@home:/etc/liquidsoap# ll -rwxr-xr-x 1 root
- dateirechte
- e lassen sich auslesen z.B mit ls -l. \\ \\ <code bash> root@home:/etc# ls -l insgesamt 1384 drwxr-xr-x ... on allen Benutzern ausgeführt werden. \\ \\ <code bash> chmod a+rx datei </code> \\ \\ \\ Sticky Bit für datei setzen. \\ \\ <code bash> chmod +t datei </code> \\ \\ \\ Zugriffsrechte f... en), alle Anderen (lesen, ausführen). \\ \\ <code bash> chmod -R 775 datei </code> \\ \\ \\ Die Datei [d
- systemd
- m "/lib/systemd/system/" Verzeichnis. \\ \\ <code bash> root@home:# ll /lib/systemd/system .... -rw-r--r... m Verzeichnis "/etc/systemd/system/". \\ \\ <code bash> root@home:# ll /etc/systemd/system .... drwxr-xr... üfen. \\ \\ \\ * systemd-analyze \\ \\ \\ <code bash> root@home:~# systemd-analyze time Startup finish... Dienste einzuleiten angezeigt. \\ \\ \\ \\ <code bash> root@home:~# systemd-analyze blame 49.5
- paketverwaltung
- rmationen. \\ \\ \\ \\ === Beispiele === \\ <code bash>dpkg -i apache2-68.deb</code> Installiert das Paket apache2-68. \\ \\ \\ <code bash> hans@home:~$ dpkg -s nautilus Package: nautilus ... onen und Abhängigkeiten von Paket. \\ \\ \\ <code bash> user@home:~$ dpkg -l | grep apache2 ii apache2-... Installierten Pakete zu "apache2". \\ \\ \\ <code bash>apt-get source [paket]</code> Paketquellen herunt
- apache
- erzeichnis in z.B. "/usr/src/" erstellt. \\ <code bash> root@home:# mkdir /usr/src/apache2.4 </code> \\ ... Quellpakete heunterladen und entpacken. \\ <code bash>root@home:/usr/src/apache2.4# wget http://ftp.fau... apache//httpd/httpd-2.4.9.tar.bz2</code> \\ <code bash>root@home:/usr/src/apache2.4# tar -xvjf httpd-2.4... sr/src/apache2.4/httpd-2.4.9/" wechseln. \\ <code bash> root@home:/usr/src/apache2.4/httpd-2.4.9# ./conf
- iptables_firewall
- utzen und / oder weiterentwickeln. \\ \\ \\ <code bash> #!/bin/bash #### Local Firewall-Script IPTABLES #### ### BEGIN INIT INFO # Provides: firew
- installation
- llverzeichnis manuell gesetzt werden. \\ \\ <code bash> root@home:/pfad/zum/typo3/verzeichnis# ln -s typ
- ices2_-_source_client
- Ices2 findet über XML Dateien statt. \\ \\ <code bash> root@host:/usr/share/doc/ices2/examples# ll insg... ligen Rechten zuerst erstellt werden. \\ \\ <code bash> root@host:/var/log# mkdir ices root@host:/var/log# chgrp icecast ices </code> \\ \\ <code bash> root@host:/etc# mkdir ices2 root@host:/etc# chgr... s2" kopieren und die Rechte anpassen. \\ \\ <code bash> root@host:/etc/ices2# cp /usr/share/doc/ices2/ex